Ice maker parts in Yukon are kind of our specialty — YAP got its start right here in the community back in 2022, and a busted ice maker is still one of the most common reasons Yukon neighbors come knocking. Whether your fridge stopped dropping cubes altogether or it's making ice the size of pebbles, the fix usually comes down to one or two specific components. We stock ice maker parts for Whirlpool, Frigidaire, GE, Samsung, and Scotsman machines, so we can get you back in business fast. No waiting on a slow shipping window — just grab the part and get it done.
Common Ice Maker Parts We Stock
Water Inlet Valve
Evaporator
Ice Maker Module
Water Line Tubing
Control Board
Harvest Fork
Common Ice Maker Problems We Fix
No water filling the ice mold
A failed water inlet valve is almost always the culprit. This solenoid-controlled valve controls water flow into the ice maker, and when it sticks closed or burns out, no water means no ice.
Ice maker not cycling at all
The ice maker module (also called the ice maker assembly head) runs the harvest cycle. When it fails, the whole unit just sits there — we carry replacement modules for most major brands.
Ice cubes freezing together in a solid block
A sticky or broken harvest fork can't sweep cubes into the bin properly, causing them to melt and refreeze into a clump. Swapping the harvest fork is a quick, inexpensive fix.
Fridge making ice but water tastes off or lines freeze up
Cracked or kinked water line tubing can restrict flow and harbor bacteria. Replacing the tubing with the correct diameter and length solves both the taste issue and freeze-up problems.
Ice maker running but not freezing
A compromised evaporator in the ice maker compartment means the refrigerant circuit isn't pulling enough heat out to freeze water. If diagnostics point here, we can help you identify the right component.
Error codes or erratic behavior on newer models
Samsung and GE ice makers especially rely on a control board to manage sensors and timing. A bad board throws codes and causes unpredictable cycling — we stock common replacement boards so you're not hunting online.
Have your model number? Find the exact part.
Type your appliance's model number into our part finder — we'll search every major supplier and pull the genuine OEM part in seconds.
“I was not certain how to go about getting parts for my oven that had failed about 2 months ago and I was stressing out over how to get the parts for an oven that I hadn’t seen locally. Thankfully YAP in Piedmont was there to save the day. Morgan was very helpful and even called …”
Do you carry ice maker parts for Yukon customers same day, or do I have to order?
Most common parts — water inlet valves, ice maker modules, harvest forks — are on the shelf right now. If we don't have your exact part in stock, we can usually get it next day. Either way, call or text us before you make the trip.
How far is the shop from Yukon?
About 12 minutes. Head north on Garth Brooks Blvd, then jump on Northwest Expressway heading west — we're right there in Piedmont. A lot of Yukon folks stop by on the way home from work, which works perfectly.
My ice maker is making small or hollow cubes. What part do I need?
Small or hollow cubes usually point to low water pressure through the water inlet valve, though a partially clogged water line tubing section can cause the same thing. Bring your fridge model number and we'll narrow it down quickly.
Is it worth repairing an ice maker or should I just replace the whole unit?
For most standalone or fridge-mounted ice makers, a single failed component like the module or inlet valve costs a fraction of a new appliance. If the compressor or sealed system is involved, the math changes — but most ice maker repairs are absolutely worth doing.
Do you carry Scotsman commercial ice maker parts?
Yes — Scotsman is one of the brands we actively stock for, including harvest components and water system parts. Commercial machines are a bit more specific, so texting your model number ahead of time helps us confirm we have exactly what you need.
Ready to get your ice maker running again? Text your model number to 405-876-8100 and The YAP Dude will tell you exactly what you need before you leave the driveway. Or just swing by the Piedmont shop — we're 12 minutes from Yukon and we keep the parts counter open and ready.
