If your ice maker has gone warm and quiet, you already know how fast that gets annoying — especially through an Oklahoma summer. El Reno residents looking for ice maker parts el reno don't have to order online and wait a week. Yukon Appliance Parts stocks the pieces that actually fail: water inlet valves, ice maker modules, harvest forks, control boards, water line tubing, and more. We carry Whirlpool, Frigidaire, GE, Samsung, and Scotsman, so whether you've got a side-by-side in the kitchen or a standalone Scotsman under the bar, there's a good chance we've got your part on the shelf today. Hop east on I-40 and you're at our Piedmont shop in about 28 minutes — one of the only stocked parts counters between El Reno and downtown OKC.
Common Ice Maker Parts We Stock
Water Inlet Valve
Evaporator
Ice Maker Module
Water Line Tubing
Control Board
Harvest Fork
Common Ice Maker Problems We Fix
No water filling the ice mold
A failed water inlet valve is almost always the culprit. It's an inexpensive solenoid valve that controls water flow into the ice maker, and we stock them for most major brands.
Ice maker runs but produces no ice
The ice maker module — the motor and cam assembly that drives the whole cycle — wears out over time. Replacing the module usually restores full production quickly.
Ice won't drop from the tray
A broken or bent harvest fork keeps cubes from ejecting properly. It's a cheap plastic part that's easy to swap and surprisingly easy to overlook.
Ice maker cycles erratically or not at all
The control board governs timing and temperature thresholds. When it fails you get odd behavior — running constantly, stopping mid-cycle, or not starting at all.
Thin, hollow, or cloudy cubes
Restricted water flow from a kinked or mineral-clogged water line tubing section starves the mold. Fresh tubing is a quick, low-cost fix before blaming anything else.
Frost buildup in the ice maker compartment
A failing evaporator or a sealed-system issue can cause ice to clump and frost over. We can help you identify whether it's the evaporator assembly or something upstream.
Serving El Reno with ice maker parts
There isn't much between El Reno and downtown OKC for appliance parts — we're the closest real parts counter. The drive is about 28 minutes: east on Route 66 or I-40 into Yukon, then north to Piedmont. Worth the trip versus waiting days on a shipped part, and if the drive doesn't work, delivery usually does.
the Route 66 corridorthe I-40 sideout toward Fort Reno
Have your model number? Find the exact part.
Type your appliance's model number into our part finder — we'll search every major supplier and pull the genuine OEM part in seconds.
“I was not certain how to go about getting parts for my oven that had failed about 2 months ago and I was stressing out over how to get the parts for an oven that I hadn’t seen locally. Thankfully YAP in Piedmont was there to save the day. Morgan was very helpful and even called …”
I'm in El Reno — do I need to call ahead or can I just come in?
Walk-ins are welcome, but if you've already got a model number, shoot us a text at 405-876-8100 before you make the drive. We can confirm the part is on the shelf and have it pulled for you.
How do I find my ice maker's model number?
For refrigerator ice makers, check the label inside the fresh-food compartment, usually on the side wall or ceiling. Standalone units like Scotsman machines typically have a plate on the back or inside the door panel.
Is it worth repairing an ice maker or should I just replace the whole unit?
Most ice maker failures come down to one or two inexpensive components — a water inlet valve or harvest fork rarely costs more than $30-50 in parts. If the compressor or sealed system is gone, that's a different conversation, but most repairs are absolutely worth it.
Do you stock Samsung ice maker parts? Those seem hard to find.
Yes — Samsung ice maker parts are in demand and we keep common modules and water inlet valves for Samsung units in stock. Text us your model number and we'll confirm availability fast.
Can I get el reno ice maker parts shipped to me instead of driving over?
We focus on same-day over-the-counter sales rather than shipping, which is actually faster for most customers. If you need it today, the 28-minute drive usually beats any shipping option hands down.
Are you closer to El Reno than the OKC suppliers?
Yes — we're roughly half the drive of the parts houses on the far side of OKC, and you skip city traffic entirely: Route 66 or I-40 east into Yukon, then north to Piedmont, about 28 minutes.
Can you get parts to El Reno without a pickup?
Usually, yes — El Reno is at the edge of our delivery range, so text your model number to 405-876-8100 and we'll confirm the part, the price, and whether we can run it out to you.
Ready to get your ice maker running again? Text the YAP Dude at 405-876-8100 with your model number and we'll have your part ready before you pull into the parking lot. Rather just walk in? We're in Piedmont and we're glad to have you. Either way, you'll leave with the right part.
