When your ice maker quits, you notice fast — warm drinks, frustrated family, and a freezer drawer full of nothing. The good news: most ice makers die from one or two worn-out components, not the whole machine. At Yukon Appliance Parts, we stock the ice maker parts Piedmont homeowners need to get cubes dropping again, usually same day. We carry water inlet valves, ice maker modules, harvest forks, control boards, water line tubing, and more for Whirlpool, Frigidaire, GE, Samsung, and even commercial brands like Scotsman. Whether your fridge stopped making ice altogether or it's grinding and cycling without producing anything, there's a part on our shelf with your name on it. Swing by 13100 Colony Pointe Blvd, Suite 107 — we're right here in Piedmont, in the strip plaza off Edmond Road — and The YAP Dude will help you nail down the right part before you leave.
Common Ice Maker Parts We Stock
Water Inlet Valve
Evaporator
Ice Maker Module
Water Line Tubing
Control Board
Harvest Fork
Common Ice Maker Problems We Fix
No water filling the ice mold
A failed water inlet valve is almost always the culprit. This solenoid-operated valve controls water flow into the ice maker, and when it burns out or gets clogged with mineral deposits, nothing fills the tray.
Ice maker cycles but drops no ice
The harvest fork (also called the bail arm or stripper) knocks finished cubes out of the mold. If it's cracked or stuck, the cubes never make it to the bin — swapping the fork is a quick, cheap fix.
Maker runs constantly and overflows
The ice maker module — the brain of the assembly — controls timing and shutoff. A faulty module loses track of the cycle and keeps running, which means water everywhere.
Freezer is cold but ice maker won't freeze
A damaged evaporator or a cracked water line tubing run can prevent the mold from reaching freeze temperature or starve it of water entirely. We stock replacement tubing in standard lengths you can cut to fit.
Ice maker won't respond or throws error codes
On newer Samsung and GE refrigerators especially, a failed control board can lock up the entire ice system. Replacing the board restores communication between the dispenser, the module, and the water valve.
Serving Piedmont with ice maker parts
This is our home turf — the shop sits at 13100 Colony Pointe Blvd, Suite 107, in the strip plaza off Edmond Rd (NW 178th). Piedmont customers mostly walk in, but texting the model number first means the part is sitting on the counter when you arrive.
Colony Pointethe Edmond Rd (NW 178th) corridordowntown Piedmontthe Deer Creek side
Have your model number? Find the exact part.
Type your appliance's model number into our part finder — we'll search every major supplier and pull the genuine OEM part in seconds.
“I was not certain how to go about getting parts for my oven that had failed about 2 months ago and I was stressing out over how to get the parts for an oven that I hadn’t seen locally. Thankfully YAP in Piedmont was there to save the day. Morgan was very helpful and even called …”
Do you stock ice maker parts for Samsung French-door refrigerators?
Yes — Samsung French-door ice makers are one of our most common repair calls. We keep Samsung water inlet valves, ice maker modules, and control boards in stock because those units have well-known failure points.
How do I know if it's the water inlet valve or the ice maker module that's bad?
A quick test: unplug the fridge, remove the ice maker, and apply 120V directly to the valve's solenoid terminals — if water flows, the valve is fine and the module is likely the problem. If you'd rather not DIY-diagnose, bring us your model number and we'll walk you through it at the counter.
I'm in Piedmont — do I need to order online or can I just come in?
Come on in. We're locally stocked for ice maker repair in Piedmont, OK, so there's no waiting on a shipping box. Grab your model number off the fridge door jamb sticker and we'll pull the right part while you're here.
My ice tastes weird after replacing parts — what's going on?
Flush the first two or three batches of ice after any repair involving water line tubing or the inlet valve — residue and air pockets can affect the first few cycles. If taste problems persist, the water filter may also need replacing.
Do you carry Scotsman commercial ice maker parts?
We stock select Scotsman components and can source others quickly. Commercial machines take heavier use, so we treat those repairs seriously — call or text ahead with your model number and we'll confirm availability before you make the trip.
Where exactly in Piedmont is the shop?
13100 Colony Pointe Blvd, Suite 107 — the strip plaza just off Edmond Rd (NW 178th). Open weekdays 8am to 5pm; text 405-876-8100 first and we'll have your part pulled.
Can I just walk in without texting first?
Absolutely. Walk-ins are how most Piedmont neighbors shop. That said, texting your model number ahead means zero wait — we'll have the exact OEM part checked and ready.
Ready to get your ice maker back online? Text us your model number at 405-876-8100 and we'll have your part pulled before you walk in, or just stop by 13100 Colony Pointe Blvd, Suite 107 in Piedmont. The YAP Dude is here to help you skip the guesswork and get cold drinks back on the menu today.
