If your washer is leaking, won't spin, or just quit mid-cycle, you don't have to order online and wait a week — Yukon Appliance Parts stocks the washer parts El Reno residents need, and we're only about 28 minutes away. Jump east on I-40, swing north through Yukon, and you'll hit our Piedmont shop before most online shipments even leave a warehouse. We carry drain pumps, boot seals, lid switches, control boards, suspension rods, and more for Whirlpool, Maytag, Samsung, LG, GE, and Frigidaire machines. Tell the YAP Dude your model number and we'll pull the right part before you even walk through the door.
Common Washer Parts We Stock
Drain Pump
Boot Seal
Suspension Rod
Shock Absorber
Lid Switch
Drive Belt
Agitator Dogs
Control Board
Common Washer Problems We Fix
Water pooling under the machine
A cracked or clogged drain pump is almost always the culprit. Swapping it out is a straightforward DIY repair that stops the leak and gets your spin cycle working again.
Tub leaks during the wash cycle
The boot seal — the rubber gasket between the door and the drum on front-loaders — tears over time and lets water escape. A new boot seal fixes it cleanly.
Washer walks across the floor or thumps loudly
Worn suspension rods or shock absorbers let the tub swing too freely during spin. Replacing them brings the drum back into balance and kills the noise.
Lid won't trigger the spin cycle
A failed lid switch tells the machine the lid is open even when it isn't, so the washer just sits there. A new lid switch restores the signal and gets things moving.
Agitator turns but clothes barely move
Agitator dogs — the small plastic ratchet pieces inside the agitator cap — wear flat and stop grabbing. They're inexpensive and one of the easier fixes you can do yourself.
No response from the control panel
When buttons stop responding or cycles won't start, the control board is often the issue. We stock boards for most major brands so you can avoid a costly service call.
Have your model number? Find the exact part.
Type your appliance's model number into our part finder — we'll search every major supplier and pull the genuine OEM part in seconds.
“I was not certain how to go about getting parts for my oven that had failed about 2 months ago and I was stressing out over how to get the parts for an oven that I hadn’t seen locally. Thankfully YAP in Piedmont was there to save the day. Morgan was very helpful and even called …”
Is Yukon Appliance Parts really worth the drive from El Reno?
For most El Reno customers, yes — you're looking at about 28 minutes east on I-40 and then north to Piedmont. Compare that to waiting five to seven days for an online order to show up, and a same-day repair starts looking pretty good.
Do you stock parts for Samsung and LG front-loaders?
We do. Samsung and LG are two of our most-requested brands, and we keep common items like drain pumps, boot seals, and control boards on the shelf for both.
How do I find my washer's model number?
On most top-loaders, the label is inside the lid frame. On front-loaders, check the door jamb or the back panel. Snap a photo and text it to us — we'll confirm the part before you make the trip.
Can I do these repairs myself, or do I need a tech?
Most of the parts listed here — lid switches, agitator dogs, drive belts, suspension rods — are genuine DIY repairs with plenty of how-to videos online. The YAP Dude is happy to walk you through what's involved when you pick up your part.
What if you don't have my part in stock?
We can usually get uncommon parts ordered in quickly — often next-day. Call or text us your model number ahead of time and we'll let you know what's on the shelf and what needs to be ordered.
Ready to get your washer back online? Text your model number to 405-876-8100 and the YAP Dude will have your part ready when you arrive. You're welcome to walk in to the Piedmont shop anytime during business hours — no appointment needed. El Reno washer parts, without the wait.
