When your washer quits mid-cycle, the last thing you want to do is wait a week for a mail-order part. If you're in Edmond, you're actually in luck — Yukon Appliance Parts is about 18 minutes away, straight shot west on Memorial Road into Piedmont, and we've got a deep bench of washer parts ready to go same day. We stock components for Whirlpool, Samsung, LG, Maytag, GE, and Frigidaire machines, so whether you're fixing a top-loader that won't spin or a front-loader leaving water on the floor, we can almost certainly help you walk out the door with the right part. Search 'washer parts Edmond' and you'll find us — then just come grab what you need.
Common Washer Parts We Stock
Drain Pump
Boot Seal
Suspension Rod
Shock Absorber
Lid Switch
Drive Belt
Agitator Dogs
Control Board
Common Washer Problems We Fix
Washer won't drain
A failed drain pump is almost always the culprit. We stock replacement drain pumps for most major brands so you can swap it out the same afternoon.
Water leaking from the door
On front-load machines, a cracked or moldy boot seal lets water escape every cycle. A new door boot seal is a straightforward fix and we keep them in stock for the most common LG, Samsung, and Frigidaire models.
Washer shakes violently during spin
Worn suspension rods or shock absorbers let the tub bounce around instead of staying centered. Replacing all four at once is the right move, and we've got them for Whirlpool and Maytag top-loaders.
Lid won't let the machine start
A bad lid switch tells the washer the lid is always open, so it refuses to run. It's a cheap fix — grab the replacement lid switch and you're usually back up in under an hour.
Agitator moves but clothes don't
Stripped agitator dogs are the classic culprit in top-loaders — the agitator spins freely instead of grabbing. A set of replacement agitator dogs is one of the most common parts we sell.
Washer won't spin at all
On belt-driven machines, a broken drive belt stops the drum cold. We stock drive belts for a wide range of models so you don't have to guess at sizes online.
Serving Edmond with washer parts
Edmond is the closest big city to the shop on the metro's north side — from west Edmond it's a straight shot: Memorial Rd west, then down NW 178th into Piedmont, about 18 minutes. A lot of our Edmond customers are in the Deer Creek district, which is practically next door.
the Memorial Rd corridorwest Edmond / Covellthe Deer Creek school districtaround UCO
Have your model number? Find the exact part.
Type your appliance's model number into our part finder — we'll search every major supplier and pull the genuine OEM part in seconds.
“I was not certain how to go about getting parts for my oven that had failed about 2 months ago and I was stressing out over how to get the parts for an oven that I hadn’t seen locally. Thankfully YAP in Piedmont was there to save the day. Morgan was very helpful and even called …”
I found you searching 'washer repair Edmond OK' — do you actually serve Edmond customers?
Absolutely. Edmond is one of our most common customer areas, and plenty of folks make the quick drive to our Piedmont shop rather than wait days for shipping. We're stocked and ready when you get here.
Do you carry parts for Samsung front-load washers?
Yes — Samsung is one of the brands we stock regularly, including drain pumps, boot seals, and control boards for popular front-load models. Call or text ahead if you want us to confirm your specific part number.
Can you help me figure out which part I actually need?
That's half the job at the counter. Bring your model number (usually on a sticker inside the lid or door frame) and describe what the machine is doing, and The YAP Dude will point you in the right direction.
What if the part I need isn't on the shelf?
We can order it fast — often next day. It still beats most online lead times once you factor in shipping, and you can pick it up locally instead of waiting at your door.
Is a bad control board worth replacing, or should I just buy a new washer?
It depends on the machine's age and the board cost. Control boards can run anywhere from $60 to $200 depending on brand and model, so if the washer is otherwise solid, replacing it usually makes financial sense. We can pull up the part cost on the spot so you can make an informed call.
How long is the drive from Edmond?
About 18 minutes from most of Edmond — west on Memorial Rd (or Covell), south on NW 178th, then west into Piedmont. From the Deer Creek area it's under 10.
Do you deliver to Edmond?
Yes — free local delivery covers Edmond, including the Memorial Rd corridor and Deer Creek. Text your model number to 405-876-8100 and we'll confirm stock and a drop-off window.
Ready to get your washer running again? Text your model number to 405-876-8100 and we'll have your part ready before you pull in, or just walk into the Piedmont shop and The YAP Dude will take care of you at the counter. We're here Monday through Saturday — come see why Edmond customers keep making the drive.
