Your washer quit mid-cycle and the laundry pile isn't getting any smaller — we get it. Yukon Appliance Parts stocks the washer parts Mustang homeowners need to get back up and running fast, whether you're fixing a Whirlpool top-loader, a Samsung front-loader, or anything in between. We carry drain pumps, boot seals, lid switches, drive belts, suspension rods, shock absorbers, agitator dogs, and control boards for the brands people actually own around here: Whirlpool, Maytag, GE, LG, Samsung, and Frigidaire. If your exact part is on the shelf, you can have it same day. If it needs to be ordered, we turn those around quick. Most Mustang customers either have us deliver or make the easy 22-minute drive north on Mustang Rd through Yukon and then west into Piedmont — it's a straightforward shot and the part you need is usually waiting at the counter.
Common Washer Parts We Stock
Drain Pump
Boot Seal
Suspension Rod
Shock Absorber
Lid Switch
Drive Belt
Agitator Dogs
Control Board
Common Washer Problems We Fix
Water pooling in the drum or not draining
A failed drain pump is almost always the culprit. We stock direct replacements for the most common Whirlpool, Maytag, and Samsung drain pumps so you're not waiting days on a shipment.
Musty smell or water leaking from front-loader door
A torn or moldy boot seal lets water escape and odors build up. Replacing the door boot seal is a straightforward repair that puts the leak to rest for good.
Washer walking across the floor or banging loudly
Worn suspension rods or shock absorbers let the drum swing too freely during the spin cycle. A fresh set of suspension rods or shocks brings the tub back under control.
Lid switch keeps tripping or washer won't start
The lid switch tells the machine the lid is closed and safe to run — when it fails, nothing happens. A new lid switch is one of the quickest fixes on a top-loader.
Agitator turning but not moving clothes
Worn agitator dogs let the agitator ratchet without gripping. Replacing the agitator dogs restores that back-and-forth motion and gets clothes actually moving through the wash.
Belt-drive washer spinning weakly or not at all
A cracked or stretched drive belt slips instead of transferring power to the drum. We keep drive belts in stock for the most common Whirlpool, GE, and Frigidaire belt-drive models.
Serving Mustang with washer parts
Mustang sits about 22 minutes south of the shop — straight up Mustang Rd through Yukon, then west to Piedmont. Honestly, most Mustang customers don't make the drive: free local delivery covers Mustang, so the usual routine is text the model number, we confirm the OEM part, and it shows up at your door.
the Mustang Rd corridorthe SH-152 sideeast toward Czech Hall Rd
Have your model number? Find the exact part.
Type your appliance's model number into our part finder — we'll search every major supplier and pull the genuine OEM part in seconds.
“I was not certain how to go about getting parts for my oven that had failed about 2 months ago and I was stressing out over how to get the parts for an oven that I hadn’t seen locally. Thankfully YAP in Piedmont was there to save the day. Morgan was very helpful and even called …”
Yes — delivery is one of the most popular options for our Mustang customers. Reach out by text or phone, give us your model number and the part you need, and we'll work out the details.
How do I find my washer's model number?
On most top-loaders it's on a sticker inside the door frame or along the back panel. Front-loaders usually have it on the door jamb. Snap a photo and send it our way — we'll do the lookup for you.
I'm not sure which part is bad. Can you help me diagnose it?
Absolutely. Tell us what the washer is doing (or not doing) and we'll point you toward the most likely part. The YAP Dude has worked through just about every symptom a washer can throw at you.
Do you stock parts for Samsung and LG front-loaders?
We do. Samsung and LG are two of the brands we see most often, so we keep common parts like drain pumps, boot seals, and control boards on hand for those machines.
Is it worth repairing my washer or should I just replace it?
As a rule of thumb, if the repair costs less than half the price of a new machine and the washer is under ten years old, fixing it almost always makes financial sense. Parts like a drain pump or lid switch run a fraction of what a new washer costs, and the fix usually takes less than an hour.
Do I have to drive to Piedmont from Mustang?
No — Mustang is squarely inside our free local delivery zone. Most Mustang orders are text-to-doorstep: send the model number to 405-876-8100 and we'll handle the rest.
What's the fastest route from Mustang to the shop?
North on Mustang Rd through Yukon, then west to Piedmont — about 22 minutes. If you're coming after work, text ahead and we'll have the part waiting.
Ready to get that washer running again? Text us at 405-876-8100 with your model number and we'll have your part ready — whether you want it delivered or you're making the drive up to our Piedmont shop. Either way, the YAP Dude's got you covered.
