If your stove is acting up and you're searching for stove parts in Mustang, you've found the right spot. Yukon Appliance Parts stocks the coils, switches, knobs, and receptacles that fix most electric range problems same day — no waiting on a slow shipping window or overpaying at a big-box store. We carry parts for Whirlpool, Frigidaire, GE, Maytag, and Kenmore, so odds are good we've got exactly what your range needs on the shelf right now. Mustang customers typically swing up through Yukon and head west to our Piedmont shop — about a 22-minute drive up Mustang Rd — or we can arrange delivery if that works better for you. Either way, The YAP Dude is ready to look up your model number and get you the right part the first time.
Common Stove Parts We Stock
Burner Coil
Drip Pan
Burner Switch
Control Knob
Burner Receptacle
Infinite Switch
Common Stove Problems We Fix
Burner won't heat
A failed burner coil is usually the culprit. We stock replacement coils in the most common 6-inch and 8-inch sizes for all the major brands.
Burner coil sitting in a greasy, warped pan
A new drip pan seats the coil properly and keeps heat reflecting where it belongs. We keep chrome and porcelain drip pans in both sizes.
Burner stuck on one heat level
The infinite switch controls how much power cycles to your burner — when it fails, you lose the ability to dial between low and high. Swap it out and you've got full control back.
Burner won't turn on or off correctly
A worn burner switch or faulty burner receptacle can cause intermittent power or a dead element. We can help you identify which one is failing by your model number.
Knob broken or melted
A cracked or melted control knob is a safety issue as much as a cosmetic one. We carry OEM-match knobs for Whirlpool, GE, Frigidaire, Maytag, and Kenmore ranges.
Serving Mustang with stove parts
Mustang sits about 22 minutes south of the shop — straight up Mustang Rd through Yukon, then west to Piedmont. Honestly, most Mustang customers don't make the drive: free local delivery covers Mustang, so the usual routine is text the model number, we confirm the OEM part, and it shows up at your door.
the Mustang Rd corridorthe SH-152 sideeast toward Czech Hall Rd
Have your model number? Find the exact part.
Type your appliance's model number into our part finder — we'll search every major supplier and pull the genuine OEM part in seconds.
“I was not certain how to go about getting parts for my oven that had failed about 2 months ago and I was stressing out over how to get the parts for an oven that I hadn’t seen locally. Thankfully YAP in Piedmont was there to save the day. Morgan was very helpful and even called …”
Do you stock stove parts for Mustang customers, or do I have to order online?
We keep a solid inventory on the shelf in Piedmont, so most common parts are available the same day you call or stop in. No waiting on shipping — just a short drive up Mustang Rd.
How do I know if I need a new infinite switch or a new burner coil?
If one specific burner is completely dead, start with the coil and receptacle. If the burner heats but won't adjust between settings, the infinite switch is the more likely problem. Text us your model number and we can help you narrow it down fast.
Do you carry parts for older Kenmore and Maytag ranges?
Yes — Kenmore and Maytag are two of our most-requested brands, and many of their older ranges use parts that are still in production. Give us the model number and we'll tell you right away if it's in stock.
Is it worth repairing my stove, or should I just replace it?
Most electric range repairs — a burner coil, a drip pan, a bad switch — run well under $50 in parts and take under an hour. If the stove is otherwise solid, fixing it almost always beats the cost of a new range.
Can I text a photo of my broken part to figure out what I need?
Absolutely — text a photo and your appliance model number to 405-876-8100 and The YAP Dude will identify the part and confirm whether it's on the shelf before you make the trip.
Do I have to drive to Piedmont from Mustang?
No — Mustang is squarely inside our free local delivery zone. Most Mustang orders are text-to-doorstep: send the model number to 405-876-8100 and we'll handle the rest.
What's the fastest route from Mustang to the shop?
North on Mustang Rd through Yukon, then west to Piedmont — about 22 minutes. If you're coming after work, text ahead and we'll have the part waiting.
Ready to get your range cooking again? Text your model number to 405-876-8100 and we'll confirm the part is in stock before you leave Mustang. Or just walk into the Piedmont shop — we're friendly, fast, and we'll get you the right stove part without the runaround.
